Flossie

Flossie

Well-Known Member
2001 2.5.
Thin tube, leak off pipe size, badly rotted. Fits on this steel pipe and heads off to the egr filter area on the compressor side of the bulkhead. I've blanked the egr exhaust inlet btw.
Can I just plug the end of the steel pipe that the rotted hose connected to? Or do I need to fit a new length of tubeing?
Centre of pic is the steel pipe that the rotted hose connected to. It's proper rotted, crumbles between the fingers.:eek:
IMG_20211005_162101_665.jpg
 
That is the EGR regulator valve. I changed mine on my P38 - TD as part of all the other stuff i changed before the car went back to the dealer for REFUND.

Regards,
 
Anyone? I'm passing the local Indy tomorrow morning so I can pick up a length of spill pipe of needs be.
 
Rubberknees said:
Just had a look for you
View attachment 249690
Click to expand...
That rubber tube to the left of it is what goes to the metal tube in my pic above. Only just got home and had another look, the metal tube runs along the engine then 90 Deg bends around the front and connects via a short rubber hose to a round plate inline with the camshaft, what's that round thing, vac pump?
 
Flossie said:
That rubber tube to the left of it is what goes to the metal tube in my pic above. Only just got home and had another look, the metal tube runs along the engine then 90 Deg bends around the front and connects via a short rubber hose to a round plate inline with the camshaft, what's that round thing, vac pump?
Click to expand...
The round thing is indeed the vac pump.
 
You must log in or register to reply here.

Similar threads

B
Discovery 2 TD5 Oil Cooler coolant outlet
Replies
6
Views
754
Bugz
B
S
Master Clutch Thread size
Replies
4
Views
679
sprie
S
P
FL1 TD4 Auto vacuum hose issues
Replies
5
Views
2K
PDase
P
K
Black smoke and no power
Replies
4
Views
1K
lynall
L
V
Freelander 2 (LR2) Hoses
Replies
5
Views
2K
Vinny73
V