J

Japan Black

Member
A new day, a new noise!! Can anyone help? Drove to work, no problem. Drove back and started hearing an awful sound of metal on metal.... can't see anything detached. The hand brake has been acting up lately - hoping it could be something to do with that?

The noise just happens sporadically. Not dependent on clutch, acceleration or braking etc... don't even want to drive it now just in case I'll make it worse. Should I just take it to a general mechanic (which is really close by) or attempt to drive it to a Land Rover specialist? (About a 30min drive away from me).

Could it be a wheel bearing? I guess there's a lot of things it could be.... but any suggestions would help.
 
Is it dependent on road surface? Cornering?
Is it a grinding/knocking/tapping/banging..?
Any ideas as to whereabouts it might be coming from? Front or rear left or right?
 
Sounds near the mid to rear... a grinding sound (can't tell if it's left or right yet)
Happens when driving slow, straight, turn....no difference - on a road surface.
 
they tend to break up over time (if not greased up) and make a nice grinding/squealing noise. sometimes they can completely disintegrate making you stop the car to have a look!
 
mojo247 said:
universal joints in your drive shafts
Click to expand...
Silly question but if it's either of those problems... would it be ok to drive to a mechanic.... closest one I can get to is about a 5min drive but not sure they work on Landys, and I know if another guy who doesn't specializes in them but has worked on some about 15mins away. Or should I get a trailer?
 
wheel bearings can suddenly "go" as well and like to make a nice crucnchy/squealing noise to let you know!
 
Japan Black said:
Silly question but if it's either of those problems... would it be ok to drive to a mechanic.... closest one I can get to is about a 5min drive but not sure they work on Landys, and I know if another guy who doesn't specializes in them but has worked on some about 15mins away. Or should I get a trailer?
Click to expand...

should be if its not surging, i.e. if it feels like the brakes are being pressed a bit. worth checking though!
 
Get underneath see if there's play by trying to twist the prop. If there's movement in the joint there's a problem. If they're tight the uj's are okay
Try turn your handbreak drum too. See if resisance/grind when handbreak off. Should move a little without having to roll the vehicle
 
Also I wouldn't drive on knackered ujs after seeing how they can flip cars
Like a grenade going off if unlucky and going fast
 
alexc2701 said:
Get underneath see if there's play by trying to twist the prop. If there's movement in the joint there's a problem. If they're tight the uj's are okay
Try turn your handbreak drum too. See if resisance/grind when handbreak off. Should move a little without having to roll the vehicle
Click to expand...

Just to add the u/js need checking with the wheels chocked, handbrake off and gearbox in nuetral.
 
best way is with which ever prop your checking is to have one wheel on that axle jacked clear of the ground apart from play joints can seize prop needs to feel smooth as you rotate it and you can still feel for play
 
You must log in or register to reply here.

Similar threads

O
Defender - 2002 - engine noise
Replies
16
Views
1K
OrlaP
O
dag019
LT77 clicking loudly in 5th gear
Replies
7
Views
901
Skolmate
Skolmate
D
What IS this noise ?
Replies
12
Views
2K
dogdog1
D
T
Whats this noise? Help please
Replies
10
Views
670
Henry_b
Henry_b
T
Defender front wheel not spinning.
Replies
2
Views
401
miktdish
miktdish