Kiwi Jim · Mar 15, 2020

I've stripped down a large proportion of my Discovery 1 and now it's time to start putting it back together. So I'll be welding panels and patches. As a novice, I've been told that I'll need a MIG welder, and would be best using CO2/Ar gas... but what welding kit should I get?
How many Amps will I need?
What are my options?
Any recommendations?

Knappster · Mar 15, 2020

Probably best asked in the general Land Rover section...

Ratae · Mar 16, 2020

Mig, preferably with eurotorch.
Argoshield gas.
Automatic darkening mask.
Have a read through this: https://www.mig-welding.co.uk/forum/

Kiwi Jim · Mar 17, 2020

Ratae said:
Mig, preferably with eurotorch.
Argoshield gas.
Automatic darkening mask.
Have a read through this: https://www.mig-welding.co.uk/forum/

Thanks, that looks to be a very useful place to learn.

Shippers · Mar 17, 2020

If you can stretch the cash buy a synergenic mig 180 mines bloody brill...

Marmaduke · Mar 17, 2020

Clarke 135te from machine mart always gets good reviews, If you can get it on a 20% off day then all the better. I've got a 151te and it's way more than I'll ever need

thetim · Apr 10, 2020

/Automatic darkening mask/
This.

I use big yellow Ar/CO2/O2 (yes, oxygen) mix cylinders that are labelled as "HobbyWeld 5". Not sure of the manufacturer but mine come from SDL Minorfern who are a motor factors local to me. I pay something like £75 refundable deposit for each bottle, then about £40 to swap an empty for a full one. Vastly cheaper than the disposable bottles, and no weekly rental.

kermit_rr · Apr 10, 2020

Don't forget big_hammer and big_screwdriver
Essentials in diy land rover welding/maintenance

Saar · Apr 10, 2020

Hi,
I'm using a "Jasic 200" Mig welder. 0.8mm wire with a regular CO gas.
Do not forget the welding mask, gloves and welding jacket (many people tend to pass on the gloves and jacket, I can say from a personal experience, having flames all over you is not a nice thing...)
I use Miller jacket and some cheap no name gloves from the nearest hardware store.
If you have the budget, buy a 3M mask, the cheapest 3M mask is much better than the cheap Chinese one. I used a cheap Chinese mask for years, when I tried a 3M mask of a friend of mine I suddenly understood why it costs more (and I had a 3M one 2 days later

)

Enjoy...

PS, many parts made of Aluminium, that is a whole different story to weld Aluminium. Mig is good for the floor, roof etc.

52 classic · Apr 11, 2020

I have used a 'Maypole 120' bought secondhand over 15 years ago. Copes with any 'car gauges' of metal using .8 wire. Changed over to gasless (wire with integral flux) Cheaper to operate and the smaller reels mean that the wire is fresher when not being used frequently. Good advice about the reactive mask, wouldn't be without one of those. Gauntlet gloves of course. Don't forget a good stock of grinding discs. My welding is definately not pretty but skill with a grinder goes some way to compensate!

Bobsticle · Apr 15, 2020

https://www.landyzone.co.uk/land-rover/do-not-post-questions-please-read-before-posting.271449/

Shippers · Apr 15, 2020

Bobsticle said:
https://www.landyzone.co.uk/land-rover/do-not-post-questions-please-read-before-posting.271449/

But what welding equipment would you reccomend he bought....

Probably the old tat rusting under your bench that you dont use anymore...lol

Kev12 · Apr 16, 2020

The better the welder you can afford the easier it is. A 90-100 amp machinemart one is fine for bodywork but you'll struggle with the duty cycle on say 2/3mm

Kiwi Jim

Active Member

Knappster

Well-Known Member

Ratae

Well-Known Member

Kiwi Jim

Active Member

Shippers

Well-Known Member

Marmaduke

Well-Known Member

thetim

Well-Known Member

kermit_rr

Very

Saar

Member

52 classic

Well-Known Member

Bobsticle

De Villes Advocaat

Shippers

Well-Known Member

Kev12

Well-Known Member

Similar threads