S

sfa34

New Member
Hi,
I want to know what types of engines will fit into a freelander 1.8l year 2000.
The head gasket had blown for the 2ND time and i now want to see if a replacement engine can be done. Ive heard that a rover 220 2.0l will fit also a bmw m40, m42 or m43 will fit.

Could anyone please help and let me know what engine will fit with least amount of work.
Thank you.
 
rover 220 turbo lump (uses same gearbox) need to change input shaft apparentky) dont forget the ecu and wiring.
Or use the 220 box with Torsen LSD - but only 2wd - or can yu fit an IRD to it?
 
Haven't ever actually heard of a Freelander with any of the BMW petrol engines retro fitted though you'd think it would be possible with some work. Similarly, I've yet to hear of anyone who's actually fitted a rover 220 unit. Did once hear of a guy fitting a Mazda engine into one but not sure if it's finished yet.
 
Last edited:
sfa34 said:
If i fit the IRD will it still be 4wd.
Click to expand...


Only if you connect up the rear prop which you might end up having to shorten or lenghthen depending on the physical dimensions of the box. (Or if you're really lucky it might fit a treat but I doubt it)
 
Here's a thought. Why not find out why it failed a second time and fix the problem. Yes they're rubbish engines or they wouldn't blow head gaskets so often but you should get at least 30 or 40,000 miles between failures. If it failed before that then either it wasn't replaced properly or you have an undiagnosed fault.
 
alibro said:
here's a thought. Why not find out why it failed a second time and fix the problem. Yes they're rubbish engines or they wouldn't blow head gaskets so often but you should get at least 30 or 40,000 miles between failures. If it failed before that then either it wasn't replaced properly or you have an undiagnosed fault.
Click to expand...

+1
 
Alibro said:
Here's a thought. Why not find out why it failed a second time and fix the problem. Yes they're rubbish engines or they wouldn't blow head gaskets so often but you should get at least 30 or 40,000 miles between failures. If it failed before that then either it wasn't replaced properly or you have an undiagnosed fault.
Click to expand...

htr said:
+1
Click to expand...
well he's had since 2010 to think about it.. :)
 
Alibro said:
Here's a thought. Why not find out why it failed a second time and fix the problem. Yes they're rubbish engines or they wouldn't blow head gaskets so often but you should get at least 30 or 40,000 miles between failures. If it failed before that then either it wasn't replaced properly or you have an undiagnosed fault.
Click to expand...

+1

Liner height check?, PAYEN gasket set (NOT E-bays finest), OEM quality stretch bolts, and a PRT mod. New header tank nice as well. Later oil rail if your feeling flush.

Gotta be better than bodging some unknown quantity in.

Edit!...Note to self, look at initial posting dates! :)
 
Last edited:
You must log in or register to reply here.

Similar threads

V
Used rear differential - will it fit?
Replies
14
Views
1K
victorimba
V
J
Freelander 1.8
Replies
3
Views
1K
Nodge68
Nodge68
andyfreelandy
Freelander 1 1.8 Turbo
2
Replies
39
Views
4K
andyfreelandy
andyfreelandy
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
318
xDParis64
xDParis64
BarcombeBoy
Freelander 1: audio upgrade advice
Replies
19
Views
2K
Nodge68
Nodge68