T

TY-RANGE-ONE

New Member

• Mar 10, 2011

• #1

Hi all,
Can anyone tell me what size hose I need? It’s the coolant hose that joins to the heater matrix metal pipes on a 1997 Range Rover HSE 4.6.
Mine is leaking at a 'T' junction where the LPG system intervenes.

Also if you know the cheapest or best place to get one?



Cheers

Tyrone

 

v8hotrodboy

Active Member

• Mar 10, 2011

• #2

any motor factor should stock heater hose

 

blue beasty

Leaks an prone to bits dropping off

• Mar 10, 2011

• #3

TY-RANGE-ONE said:

Hi all,
Can anyone tell me what size hose I need? It’s the coolant hose that joins to the heater matrix metal pipes on a 1997 Range Rover HSE 4.6.
Mine is leaking at a 'T' junction where the LPG system intervenes.

Also if you know the cheapest or best place to get one?



Cheers

Tyrone

Click to expand...

most Landys use 5/8'' or whatever the metric equivalent is....15mm?

 

wammers

No longer with us, RIP

Donater

• Mar 11, 2011

• #4

Try 16mm.

 

D

dave4x4

Active Member

• Mar 13, 2011

• #5

They are 19mm.

 

wammers

No longer with us, RIP

Donater

• Mar 13, 2011

• #6

dave4x4 said:

They are 19mm.

Click to expand...

That would be 3/4" then. 5/8" 16mm.

 

D

dave4x4

Active Member

• Mar 13, 2011

• #7

I have not long replaced most of my hoses with silicone and I made a few notes at the time.
The pipes are 19mm (~ 3/4") where they come out of the bulkhead. I think in metric. On my car I used a reducing elbow to come down from 19mm to a 16mm hose goes to a Webasto engine pre heater.
The other elbow I used was 19mm both ends and joins to PCH124750 (the T shaped one which ties into the coolant expansion tank).