can be done just not easy or a diy fix.prob easier to fit a roof without a sunroof inHow hard/easy would it be for a welder to remove the sunroof and weld in a new piece and to blend it in?
I have just renovated my roof liner and found quite a bit of rust around the sunroof and think it may be easier to get rid.
Regards
why not add some silicone and some glue into the mixI'd tack it then use seam seal or some tiger seal too just to make sure on the inside before applying the chem
why not add some silicone and some glue into the mix![]()
Tiger seal is a PU adhesive sealant that's been used for years in the commercial body building industry, Silka made the first kind that I ever used back in the 80's
Look at the 40' arctic refrigerated trailers that most supermarkets use, they are all bonded together with no welds (apart from the stainless steel rear door frame)
A panel could be neatly made and bonded in place with a few rivets for good measure, would it really need blending into the roof with filler? as unless you 6'6" tall you would not see it.