MISSILE1

New Member
Anyone know of a a good person / company who offer a Wayoyl service using Dinitrol - steam/pressure clean and application ?

I'm located in St Albans and looking to Waxoyl my 2007 Defender 90

Or any other suggestions

Andrew
 
Well I want to treat the underside of the vehicle , some people say Waxoyl and others say Dinitrol is a better product

I would be I interested to know people's thoughts

Thanks for the quick response
 
Please please don't anyone take this serious it doesn't work, it's the date that made me say it.. 1st Of April:D
 
Its the cleaning bit I'm after, need to get inventive

I jetwashed more than once, the. Got underneath with a brush and water and then wire brush. I had a rust hole in one side so rinsed the inside of the chassis aswell (used cable hole in other side) was worried it would duck the wiring but it was fine) I then left it to dry for about 2 weeks in the summer then applied dinitrol 2 applications, into every book I could get in. Stuffed the bulkhead with loads.
 
I jetwashed more than once, the. Got underneath with a brush and water and then wire brush. I had a rust hole in one side so rinsed the inside of the chassis aswell (used cable hole in other side) was worried it would duck the wiring but it was fine) I then left it to dry for about 2 weeks in the summer then applied dinitrol 2 applications, into every book I could get in. Stuffed the bulkhead with loads.
How much rust converter did you use? The rejel kits only come with one 400ml aerosol is that enough? I already painted the rear 1/4 in converter paint as it cant wait until summer
 
How much rust converter did you use? The rejel kits only come with one 400ml aerosol is that enough? I already painted the rear 1/4 in converter paint as it cant wait until summer

I didn't use much tbh, I wired brushed and used a brush on converter where needed - my chassis was quite good though - just surface rust in a few places that came out okay. Most of the rust converter spray went on the bulkhead footwells
 

Similar threads