B

bigroo

New Member

• Jul 11, 2011

• #1

Hi all,

Day one... second post!

I have a problem with my washers in that the drivers side work perfectly fine but the passenger side has no water coming from it. I opened up the bonnet to see that the small hose is there but there is no connector linking the 2 pipes (passenger & driver washers), it is just sitting there open at one end.

What type of connector should be there & do you think that I can still get hold of one? Presumably it will be some sort of tee section...

Cheers,

bigroo

 

Fur Trapper

Banned

• Jul 11, 2011

• #2

bigroo said:

Hi all,

Day one... second post!

I have a problem with my washers in that the drivers side work perfectly fine but the passenger side has no water coming from it. I opened up the bonnet to see that the small hose is there but there is no connector linking the 2 pipes (passenger & driver washers), it is just sitting there open at one end.

What type of connector should be there & do you think that I can still get hold of one?

Cheers,

bigroo

Click to expand...

The correct one and yes

 

Optimus Prime

Well-Known Member

• Jul 11, 2011

• #3

comes in to a tee at the drivers nozzle, then along to the bottom of the passenger nozzle.

I changed the rubber hose for clear on mine, bought it in B&Q for about a quid. Maybe they do the tee pieces too. If not, and main dealer is really expensive then try a fish tank shop as the pipe is the same size as air pipe, or get one from a breakers.

 

R

Richard Martin

Well-Known Member

• Jul 11, 2011

• #4

Halfords do all sorts of pipes and fittings for windscreen washers, you might find something there

 

B

bigroo

New Member

• Jul 11, 2011

• #5

Thanks all, I had a good look today & both of the fittings that are in the bonnet when viewed from the open bonnet are exactly the same. I presume that the O/S is the tee section so why have I got essentially an elbow fitting the same as the N/S?

I have a couple of pics which I'll try to put online later.