G

Gentlemanthug

New Member

• Sep 4, 2012

• #1

V8 4.6 - I need to remove the viscous fan to get at the water pump to change the gasket. Does anyone know a work around so that you don't have to use special tools LRT-12-093 and LRT-12-094. They don't show the heads of the tools but I suspect that they are just big spanners. Or, does anyone know where you can get the tools? Thanks

 

wammers

No longer with us, RIP

Donater

• Sep 4, 2012

• #2

36mm spanner hit it with an hammer right to left. Looking from front of car.

 

G

Gentlemanthug

New Member

• Sep 4, 2012

• #3

You're a proper gent. I don't know which is more expensive, a 36mm spanner or the tool. I'm just waiting for a quote for the pair from Britpart.

 

wammers

No longer with us, RIP

Donater

• Sep 4, 2012

• #4

Gentlemanthug said:

You're a proper gent. I don't know which is more expensive, a 36mm spanner or the tool. I'm just waiting for a quote for the pair from Britpart.

Click to expand...

You can get them off Ebay don't know how good they are though. Viscous usually needs the spanner shocking with an hammer no matter which tool you use.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Sep 4, 2012

• #5

Halfrauds sell em cheap enuf .

 

Datatek

Well-Known Member

• Sep 5, 2012

• #6

Gentlemanthug said:

You're a proper gent. I don't know which is more expensive, a 36mm spanner or the tool. I'm just waiting for a quote for the pair from Britpart.

Click to expand...

Draper viscous fan spanner £6 on Ebay