Craig81fenner said:

Thanks for that ovalandrover

please excuse my lack of mechanical knowledge but what are the UJ's?

Craig

Click to expand...

Craig81fenner said:

hi RR buds

After posting this plea for help on the anything goes page and getting the most amount of abuse I'll try this section and hope for a better result.

I have a L322 4.4 v8 on a 53 plate. When I get to 70mph I get a vibrating noise coming from what sounds like the bottom centre of my windscreen or under my dash around the centre speaker area. I can't pin point it. Has any one had an issue like this or have any idea as to what could be causing the issue.

Any help would be appreciated.

Craig

Click to expand...

As @Wazzajnr there have been a few of us with TC and injector issues but they could never be described as a noise coming the windscreen or dash speaker area. Mine was like driving a vehicle with square wheels. Some describe it like driving over a cattle grid.
Also that was far from ' the most amount of abuse' , you received in Anything Goes. You actually got off quite lightly

Craig81fenner said:

It's a noise, as the vehicle drive is very smooth. It sounds like a something vibrating in the wind. It's not the windscreen wipers/arms as when driving with them working I still get the same annoying noise. Like if you held a piece of paper in the wind and you get that ripple noise.

I did gather I got away lightly. Expected more.

Craig

Click to expand...

gold rover said:

That makes things a bit clearer and might help people come up with more relevant ideas. My own thought is have you checked the seal around the windscreen. I recently had a 'wind' noise from mine , which manifested from approx 60mph. Stealers wanted silly money to fix it, a little silicone to seal approx 1cm of lift and all was sorted. Other thought is have you checked the little round poppie-in things on plastic area below windscreen .......... can't for the life of me remember what they or it is called. I'm having a 'grey' moment

Click to expand...

oakey said:

I would suggest loose change fallen into the air vents cos thats what I have. Never managed to get it out yet so turn the radio up

Click to expand...

tomcat59alan said:

We know all about your wind noise,it's legendary

Click to expand...

tomcat59alan said:

Cannot be loose change, he has an l322.

Click to expand...

Turboman said:

Could be a loose screw, instead!

Click to expand...

tomcat59alan said:

Could be, a tight screw gives a squeal not a vibration.

Click to expand...

ovalandrover said:

Or a scream

Click to expand...