R

richbay

New Member
i put some white marks on the vcu as it seems tight on lock, (i know this is normal, but i thought i would check) drove forward and back 5 times, on lock etc etc, about 5 metres at speeds of 5mph max, lines are lined up, have i got a problem , or just not excersised it enough
 
before yu get dispirited did yu use the Willo method? cos if yu dont mark it in the right places it dont work too well. do a search - it has been written up how to do it - or shout.......




MING!
 
Mark up the props as well as the vcu .

I cant remeber which prop spins seperate from the vcu
could be the rear ??
 
mondo said:
Mark up the props as well as the vcu .

I cant remeber which prop spins seperate from the vcu
could be the rear ??
Click to expand...
aye up mondo. . . .ouse that there tratter doin ? . . . . .reet as mondo sis mark both i/p un o/p drive shafts un vcu. . . .take it on some slippy grass [golf course is best] un spin them there wheels. . . .lines should be outa line [meaning vcu worked] if not try agin ,if still the same then vcu is fooked . . . .
 
Me trackters doooin just ferkin fine ta mingo!;)

an i dunt drink se much doozel.:p

and it more cumfeeeyer:D

I ferkin luvs me tracter duz me;)
 
s2_laz.jpgYor ma waaf naaow.s2_laz.jpg
 
You must log in or register to reply here.

Similar threads

MollyNomad
Freelander 1 VCU Test
Replies
4
Views
1K
MollyNomad
MollyNomad
G
2.5 NA won’t start after injection pump swap.
Replies
3
Views
739
al2647
A
xDParis64
Right...
Replies
9
Views
906
pwood999
pwood999
D
FL2 Power steering strange issue after flywheel & clutch replacement.
Replies
0
Views
594
DanHughes92
D
proto57
Freelander 2 (LR2) Trouble Diagnosing Drivetrain Issue
Replies
15
Views
2K
GrumpyGel
GrumpyGel