B

bigroo

New Member

• Aug 10, 2013

• #1

Hi all,

Can you tell me if the propshaft sits concentrically in the VCU support bearing or at the bottom of it (due to gravity presumably)?

If it's meant to be concentric then are new bearings the answer?

 

Attachments

• 
  IMG_0781.JPG

  96.3 KB · Views: 255

Nodge68

Well-Known Member

• Aug 10, 2013

• #2

The weight of the VCU and prop does cause the VCU hang low in the bearings after a while, as long as the rubber is sound and the bearings quite it's of no consequence.

 

B

bigroo

New Member

• Aug 11, 2013

• #3

Thanks Nodge68, that's one less thing to worry about!

 

B

bigroo

New Member

• Aug 17, 2013

• #4

If I'm replacing the VCU am I right in thinking that I undo the front end first & support then the rear end & support. The the VCU bearings & take it out in one piece.

 

S

SimonM

New Member

• Aug 17, 2013

• #5

Yep, that's how I did mine