ATO

ATO

New Member
Does anyone know what tool I need for replacing valve guides on a 2.25 petrol head?
 
Hammer and a drift. Freeze ur new ones and warm the head up when refitting em makes em easier to fit.
 
Ey now yer want the speshul tool or yer might distort the guide. It'll look like a pin punch where the smaller diameter is the same diameter as the valve stem, an the big diameter is the same size as the o/d of the guide. An if yer put the guides in the freezer fer a few days before you fit em they'll go in even easier.
 
cheers..where can i get the special tool and has it got a proper name..? or is it like the Special Stuff..
 
Just buy a pin punch and get someone wiv a lathe to wittle it to shape fer yer.
 
ok cheers. Anyone know if valve stem oil seals for a classic mini are the same size as 2.25 petrol ones?
 
cos I can't find any to buy on their own..have to get a full decoke set which I don't need
 
The Mad Hat Man said:
yu tight bugger - £6.35 from Paddocks.
Click to expand...
aye that's the ****e i'm trying to avoid! last time I used ****part oil seals I had to get the head off again cos oil were ****ing through worse than it was with the old knackered seals. very poor! in fact I've had the same problem with nearly every BP part I've used
 
another possibly daft question: are the valve guides for intake & exhaust the same or different sizes?
 
You must log in or register to reply here.

Similar threads

S
S2a rocker/arm hangup?
2 3
Replies
55
Views
2K
Tall Ratbag
T
L
Rocker Shaft Baffle Plate ERC2696
Replies
2
Views
238
Landyfella
L
J
Series 2a cutting out on incline
Replies
18
Views
657
tottot
tottot
S
pressing out valve guides
Replies
7
Views
1K
guineafowl21
G
W
Land Rover series 3 diesel
Replies
3
Views
295
Wildefalcon
W