Z

zhoey

New Member

• Jun 11, 2012

• #1

The crescent shaped rubber end seals at the front and rear of the valley gasket are leaking. Can anyone tell me if they can be changed without the hassle of having to remove the lower inlet manidold.

 

jamesmartin

Well-Known Member

• Jun 11, 2012

• #2

you will need new valley gasket and 2 x seals,allways best to torque manifold bolts a couple of times as gasket compresses

 

Z

zhoey

New Member

• Jun 11, 2012

• #3

jamesmartin said:

you will need new valley gasket and 2 x seals,allways best to torque manifold bolts a couple of times as gasket compresses

Click to expand...

Groan! Another weekend down the tubes. Thanks for the reply.

 

S

stopover

Active Member

• Jun 11, 2012

• #4

Check out RANGE ROVER WORLD South Africa and scroll down to valley gasket failure.

Also the valley seals are different on tin valley gaskets to the composite type.