L liamlynch New Member Feb 24, 2007 #1 Just fitted an after market Dash to my defender 300tdi it has a couple of gauge holes so I put in a volt and a vacuum gauge just to fill the holes. Can anyone please tell me how to connect the vacuum tube to the engine. Thanks Liam
Just fitted an after market Dash to my defender 300tdi it has a couple of gauge holes so I put in a volt and a vacuum gauge just to fill the holes. Can anyone please tell me how to connect the vacuum tube to the engine. Thanks Liam
L liamlynch New Member Feb 24, 2007 #3 Well that's what I thought so I teed it in ( the turbo side) but not a bit of movement at all !!!!!!
L liamlynch New Member Feb 24, 2007 #10 Yes tried that and it works OK. I presume I got the right tube, Take a look at these photos and tell me I have not cut in to the wrong one . Attachments vac tube 1.jpg 47 KB · Views: 208 vac tube 2.jpg 46 KB · Views: 247
Yes tried that and it works OK. I presume I got the right tube, Take a look at these photos and tell me I have not cut in to the wrong one .
GRUNT Well-Known Member Feb 24, 2007 #11 Blow. It looks something like. Have you got a good seal on the connections?
E eightinavee Well-Known Member Feb 24, 2007 #12 The TDI is a PRESSURE charged engine,its not April 1st yet !!
GRUNT Well-Known Member Feb 24, 2007 #13 300Tdi max boost pressure 0.83 to 1.04 Bar positive pressure........blow.
pariah Active Member Feb 24, 2007 #14 blowing into a vacuum gauge will not do anything except damage it.
The Mad Hat Man Well-Known Member LZIR Despatch Agent Feb 24, 2007 #16 ffs, Grunt - ave yu bin on the sherbert agin?
mondo Banned Feb 24, 2007 #17 GRUNT said: suck. Click to expand... OOoooh yer so sexy when yer make me do things
