Hey guys,
Took my landy for its MOT today. Failed on a couple of problems, but nothing serious.

It failed on the upper brake light in the back window not working. It seems like an intermittent problem so not sure how best to diagnose it really.

I'm sure it's just a coincidence, but after the test I opened the bonnet and I noticed the light started working again. Now I cant get the light to stop working (should be a good thing!) to find out what was wrong, and I don't want it to suddenly stop working when I take it for a re-test.

It also failed on a front anti roll bar drop link (excessive play). Seems like its just two bolts, so should be an easy fix to replace?

Also a rough front wheel bearing. I can't feel any play in it, but there are some 'tight' spots and loose spots when rotating the wheel. I'll probably let someone else fit a new one as I don't have a massive torque wrench thats required.

The fuel filter also appeared to be leaking, as the filter/housing was covered in diesel. I changed the filter a couple of months ago, and think I must not have tightened it up properly, as I managed to tighten it up further today. I've wiped the filter off anyway and hope it stays clean.

Any advice on the light?

Cheers,
Kane

Loose connection somewhere, next time it's not functioning have a look at the bulb and the holder u may have an iffy bulb or connection to the bulb, or to the supply feed on the glass or all of them.