M

Mukiwa

Well-Known Member

• Aug 15, 2016

• #1

Hi all,
I finally got the turbo off to clean & check it and the waste gate. Waste gate actuator seemed stuck but after some persuasion with wd40 and a bit of time it's now moving. Actuator seems ok now so I'm going to refit unless someone has advice otherwise.

Does anyone have either the part numbers & supplier or can I buy off you the following:
1 x r clip for wastegate & turbo pivot (mangled)
1 x exhaust manifold hex head bolt (missing)
3 x turbo / manifold mounting bolts - (1 sheared and as I needed to remove with my rattle gun I want new ones)
cheers,
Hoppy

 

ovalandrover

Well-Known Member

• Aug 15, 2016

• #2

I had to buy Turbo bolts from main dealer and isnt the maniofld studded ?

 

M

Mukiwa

Well-Known Member

• Aug 15, 2016

• #3

Thanks Ovalandrover, on mine I had 3 x multi pointed bolts through the manifold into the turbo. Also my exhaust manifold to head has allen key bolts not studs. Maybe a Friday pm special!
cheers,
Hoppy

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

• Aug 15, 2016

• #4

Can't help but remember lots of photos for when we have to do the same!

 

wammers

No longer with us, RIP

Donater

• Aug 16, 2016

• #5

Part number for turbo bolts is PYP100650L. Nothing for clip you will have to improvise. Manifold is better studded, but if you replace the Allen bolt make sure it is HT and not an Halfrauds special.

 

M

Mukiwa

Well-Known Member

• Aug 24, 2016

• #6

Wammers thanks mate. Studs would definitely be easier that's for sure!

Grrr I'll take pics before I reassemble - nice hi res ones

 

M

Mukiwa

Well-Known Member

• Aug 24, 2016

• #7

Wammers are there part numbers for the studs mate please? If so I'll fit those as I can see fitting the hex bolts is going to be a marathon swearathon

 

SpanishTony

Active Member

• Aug 24, 2016

• #8

Nice to see someone local here, I'm in Northwich.

 

wammers

No longer with us, RIP

Donater

• Aug 24, 2016

• #9

Mukiwa said:

Wammers are there part numbers for the studs mate please? If so I'll fit those as I can see fitting the hex bolts is going to be a marathon swearathon

Click to expand...

Studs are 8510231 14 off. Nut to suit 8510235 14 off. Look around for best prices.

 

M

Mukiwa

Well-Known Member

• Aug 25, 2016

• #10

SpanishTony said:

Nice to see someone local here, I'm in Northwich.

Click to expand...

Hi Tony,

Nice to see someone local as well, I thought the nearest was Wammers If you need any help and I'm available give me a shout - not sure if I'm any good though hahahaha

 

M

Mukiwa

Well-Known Member

• Aug 25, 2016

• #11

wammers said:

Studs are 8510231 14 off. Nut to suit 8510235 14 off. Look around for best prices.

Click to expand...

Cheers Wammers, as always!

 

T

tomcat59alan

Well-Known Member

• Aug 26, 2016

• #12

Mukiwa said:

Hi Tony,

Nice to see someone local as well, I thought the nearest was Wammers If you need any help and I'm available give me a shout - not sure if I'm any good though hahahaha

Click to expand...

I'm closer.

 

wammers

No longer with us, RIP

Donater

• Aug 26, 2016

• #13

tomcat59alan said:

I'm closer.

Click to expand...

Yeah you are that is a good reason for him not to let his wife out without an escort.

 

T

tomcat59alan

Well-Known Member

• Aug 26, 2016

• #14

wammers said:

Yeah you are that is a good reason for him not to let his wife out without an escort.

Click to expand...

Your not doing escorts again are you Tony, thought you had given that up after the last lot of trouble.

 

M

Mukiwa

Well-Known Member

• Aug 27, 2016

• #15

tomcat59alan said:

I'm closer.

Click to expand...

Where abouts?

 

T

tomcat59alan

Well-Known Member

• Aug 27, 2016

• #16

Mukiwa said:

Where abouts?

Click to expand...

Emmm, Wirral.

 

M

Mukiwa

Well-Known Member

• Aug 29, 2016

• #17

Ah yes, I fell for the not reading the location box trick, again! hahaha