a couple of weeks ago my fenders roof had an arguement with a tree and lost!! I have a truck cab roof and back panel that im gunna fit tommorow
just wanted to know how hard a job is it, it looks pretty straight forward but i need it to be done 2morra cos im off to kirton on sunday and i dunt wanna be driving up there with no roof coz i dint get it finished

any advice welcomed

make sure you got the brackets to bolt it to the bulkhead.

Took me an a mate about 3.5 hours to do the conversion the other way.

no brackets
how did ya do without em or can ya buy em?

i went from truck cab to hard top.

The brackts are bent pieces of steel that bolt onto the middle bulkhead, which the truck cab then bolts to. They may be attaced to the bottom of the truck cab - they are bendy pieces of steel with nuts welded to them.

You could probably make some if you are careful. I had to improvise my hard top mounts, i used stud iron in the end.

Im sure you will manage!

Didn take me an a mate that long, and we had no experience or advice so its pretty easy. 2 people are a must really though.