BritishLeylandLover
Member
Hello as per the title Iam going to bolt on a truck cab, do I need anything special or can I just get some bolts from my local engineering shop? Thanks in advance Myles.
cornish rattler
Well-Known Member
Think you need the rear corner studs and the panel that fits behind the cab underneath but all other nuts and bolts you can probably get locally, but even with the rear studs you mite be able to sort something if you don't have them 
dag019
Well-Known Member
From memory I'm fairly sure the corner bolts used are the same ones used for a hardtop so unless you have a soft top (Why would you ever get rid of that!) or no top then you should be able to reuse those. The other ones are just standard bolts and nothing special.
However as stated if you don't have one you will need the lower panel that fits under the back of the cab. These are difficult to find and expensive!
However as stated if you don't have one you will need the lower panel that fits under the back of the cab. These are difficult to find and expensive!
BritishLeylandLover
Member
I've currently got a "no top" sold the hard top to someone with the fixings.... Nothing like getting up and leaving for work at 7am on a summers morning.Driving one of these things reminds you your alive, and driving back in pitch black at 11pm is very refreshing too, I've just bought a hard top as Iam going to be doing a bit of green laning and would like something to protect me if it tipped onto its side at low speed.
