defenderlee
New Member
Replaced the rear output shaft bearing and seal the other day an all was good but now it's started leaking againg from the seal behind the transmission brake and the front output shaft seal, any ideas or resolutions?
jamesmartin
Well-Known Member
new seals ,new flanges if seal surface is scored ,check breather
defenderlee
New Member
It's had new seals I will check the breather
jamesmartin
Well-Known Member
new doesnt necessarily mean good ,did garter spring come off ,grease in rear of seal to hold spring is a good idea if tapping seal home
no need to tap it - can use flange to press new one in, with a taper bearing outer sleeve.
