Diffcruncher

New Member

• Dec 24, 2011

• #1

Morning all. The wife's discovery has decided that it needs a transfer box rebuild! The input gear bearing destroyed itself.

So today a large box from Ashcroft transmissions arrived with lots of shiny bits inside.



Plus all the bearings required.

So with the lt230 transfer box manual in hand I am going to brave the cold of the workshop and give it a go!

Any advice or comments would be great.

 

matthew2riches

New Member

• Dec 24, 2011

• #2

Have fun and enjoy it. Take a couple of bottles of wine with you and it'll be great.

 

Diffcruncher

New Member

• Dec 24, 2011

• #3

Transfer box stripped! Lots of cleaning to do now.

 

jamesmartin

Well-Known Member

• Dec 24, 2011

• #4

if input gear bearing went, what is the condition of center set of teeth on intermediate gear ,any marks on them will lead to noisy box

 

Diffcruncher

New Member

• Dec 24, 2011

• #5

Thanks for the advise, will check, take a photo and put it on here. Will try and do this tomorrow.