alistair-lee

New Member

• Feb 11, 2007

• #1

hi
would any one here have an idea on where i could find a new bearing for the rear out put shaft on the tranfer box for my s2A lightweight.
or do i have to bite the bulet and get the whole kaboodle

cheers

oh and whilst im here is there and way of removing the free play in my steering box.

 

S

slob

Well-Known Member

• Feb 11, 2007

• #2

try paddocks or craddock fer yer bearing.. or get the number off the outer race and take it to any bearing supplier

you can take up free play in yer box by means of the screw on the side of it.. slacken the lock nut and the turn the screw. am not sure on the exact procedure for it but i think you have to have the steering in a central position before you start. if i ever find where me son hide me book i'll post the correct method.

 

Lazy Landy

New Member

• Feb 11, 2007

• #3

Try this

Series Gearbox and Handbrake Parts

 

S

slob

Well-Known Member

• Feb 11, 2007

• #4

or here 7th down

John Craddock Ltd - Specialists in Land Rover Parts and Spares

 

alistair-lee

New Member

• Feb 11, 2007

• #5

cheers that was a rapid response much aprecieted

 

S

slob

Well-Known Member

• Feb 11, 2007

• #6

aye wur here to help and take the piff if possible

 

GRUNT

Well-Known Member

• Feb 11, 2007

• #7

I put new seals in my 90 from one of the commoner Landy suppliers. Both seals failed within weeks so I got some from a bearing supplier and there still ok now. They were £6.36 +VAT a pair.

 

GRUNT

Well-Known Member

• Feb 11, 2007

• #8

Swan Industrial Power Transmission UK

 

alistair-lee

New Member

• Feb 11, 2007

• #9

sorry about above managed to post an extra copy some how

 

alistair-lee

New Member

• Feb 11, 2007

• #10

hi
cheers

(take no notice of my last reply about puting an extra copy in im just cofoosing maself )