loiner1965 · Aug 25, 2008

got myself the adjustable dixon bate tow bar etc but no bolts...i know i need the angle iron bracket which fits at the bottom edge of the xmember but i can make that no worries....what size bolts will i need and do i need a back plate...its for a series 3....dixon bate online fitting instructions are down at the min so i thought i ask here,,,,thank you

iannotts · Aug 25, 2008

Morning Lioner

, not had chance to check those parts yet with the accident and all.

Will do it later when i get back home.

If my memory serves me right the bolts to hold the plate on have a 19mm Head / High tensile. may be worth putting a re-enforcing plate on the back as well.

Ian

loiner1965 · Aug 25, 2008

iannotts said:
Morning Lioner , not had chance to check those parts yet with the accident and all.

Will do it later when i get back home.

thats ok....fitted the wiper adapter ian but the choke cable is wrong,,,,mines on the ignition barrel shroud but cannot for the life of me find one like what i need on the net.....might try and modify the old one as the outer casing is split causing the cable to kink and not return properly....i got the speedo working now

.....actually seen 35mph on the clock then had to slow down....ran out of road

iannotts · Aug 25, 2008

loiner1965 said:
thats ok....fitted the wiper adapter ian but the choke cable is wrong,,,,mines on the ignition barrel shroud but cannot for the life of me find one like what i need on the net.....might try and modify the old one as the outer casing is split causing the cable to kink and not return properly....i got the speedo working now.....actually seen 35mph on the clock then had to slow down....ran out of road

I will have a look when i get back to see if there is another type

Could you send a photo of the type you need please.

Ian

loiner1965

New Member

iannotts

New Member

loiner1965

New Member

iannotts

New Member

Similar threads