ovalandrover

Well-Known Member

• Oct 5, 2019

• #1

Im shure its posted on this forum somewhere but i have left my RAVE in Australia and would like to know torque setting for::-
Camshaft bolt
Crankshaft front pulley
FIP nut
i know the crank bolt is 6 flats after inital torque but dont remember the first setting
Thank you for your help

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 5, 2019

• #2

 

Henry_b

Think outside, no box required.

• Oct 5, 2019

• #3

Tighten 'till it strips then back off 1/4 turn

 

Tenebreaux

Well-Known Member

• Oct 5, 2019

• #4

Henry_b said:

Tighten 'till it strips then back off 1/4 turn

Click to expand...

Are you the bloke that used to own my Alfa?

 

Henry_b

Think outside, no box required.

• Oct 5, 2019

• #5

Tenebreaux said:

Are you the bloke that used to own my Alfa?

Click to expand...

Pfft Alfa!

Nah

never!!

 

wammers

No longer with us, RIP

Donater

• Oct 6, 2019

• #6

ovalandrover said:

Im shure its posted on this forum somewhere but i have left my RAVE in Australia and would like to know torque setting for::-
Camshaft bolt
Crankshaft front pulley
FIP nut
i know the crank bolt is 6 flats after inital torque but dont remember the first setting
Thank you for your help

Click to expand...

Six flats will give you 360 degrees. Torque is 100 Nm initial and 150 degrees. Two and a half flats.

 

ovalandrover

Well-Known Member

• Oct 6, 2019

• #7

wammers said:

Six flats will give you 360 degrees. Torque is 100 Nm initial and 150 degrees. Two and a half flats.

Click to expand...

Ty for that i see it in the post by saint