landowner

Pensioner Pete

Full Member

• Aug 5, 2010

• #1

.


Got the big nut undone but the pulley wont budge.

I've put a puller on it with some tension then heated it up and then thrown a bucket of water at it and it's still on.

Left it overnight to see if the fairys will pull it off for me.

any other tips..




.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Aug 5, 2010

• #2

have yu tried the proper puller? If not - get this - Land Rover Diesel Engine Timing kit / set on eBay (end time 22-Aug-10 21:45:05 BST)

 

B

bmp42

Active Member

• Aug 5, 2010

• #3

I got my last stubborn one off by making my own puller - flat bar of 10mm thick with 2 holes drilled at 75mm centres, using 2 8mm x50 long allen bolts, rescrew in the crank bolt without the thick washer, fit plate with screws and then turn crank bolt with a spanner - it withdraws itself then by the crank bolt pushing against the plate. Leave gearbox in 4th gear and handbrake on

 

landowner

Pensioner Pete

Full Member

• Aug 5, 2010

• #4

I've got a couple of Mini flywheel pullers, I'll see if I can adapt those.

Light shining at end of tunnel

 

D

discotek

New Member

• Sep 4, 2010

• #5

I used a standard puller and mine came off really easy

 

hammoj28

Active Member

• Sep 14, 2010

• #6

I used a cheap puller kit form scrw fix and that did the job.