listerdiesel · Jan 23, 2014

Been swapping bits over between Philip's engine and our spare lump.

Nearly all done, hope to get back in the car if the rotten weather dries up:

Peter

L90 BCM · Jan 23, 2014

Looks good, I presume that is LPG injection you have added,( I dont know about v8's )
I have got to do a headgasket on the 4.0 Thor engine at the weekend. Are they simple or tricky.

Ohh and Keep the pictures coming

eightinavee · Jan 23, 2014

L90, do BOTH gaskets while you are there. Peter,dont forget to check the two little Tig welds that hold the CPS bracket into the block.

L90 BCM · Jan 23, 2014

eightinavee said:
L90, do BOTH gaskets while you are there. Peter,dont forget to check the two little Tig welds that hold the CPS bracket into the block.

Ha ha yes I am doing both

. I need to get the heads skimmed aswell as it is the 3rd time it has had new headgaskets in its life ( nearly 200k )
Not sure it has ever been skimmed.
If you know of anywhere in the midlands ?

Sorry to have hijacked you thread with my headgasket talk

listerdiesel · Jan 23, 2014

eightinavee said:
L90, do BOTH gaskets while you are there. Peter,dont forget to check the two little Tig welds that hold the CPS bracket into the block.

Always do, our first 'wreck' of an engine had it Araldited in place....

Ref the head gaskets, always use a decent brand, DON'T buy from ebay, use Reintz or another decent brand, not least because at least you'll get valve stem seal that fit. They need to be composite gaskets, not the steel shim type as well.

Peter

listerdiesel · Jan 23, 2014

L90 BCM said:
Looks good, I presume that is LPG injection you have added,( I dont know about v8's )
I have got to do a headgasket on the 4.0 Thor engine at the weekend. Are they simple or tricky.

Ohh and Keep the pictures coming

I did a big write up on the original rebuild back in 2009, we bought the car with a wrecked/bodged 4.6 in it. We bought a new genuine short engine and fitted that, plus all the odds and sods that needed doing.

Unfortunately that is on another forum:

New V8i 3.9 Disco owner

Takes you through the whole process from initial purchase and stripdown to the final result. We'll have had it on the road 5 years come 19th July.

One thing we found out was that cross-bolted engines come in two flavours, and the one we bought wasn't a Thor version, but it was only the crankshaft pickup casting that had to be modified, and we have a new one to put in if we ever take the engine out for any reason.

Peter

listerdiesel · Jan 23, 2014

L90 BCM said:
Ha ha yes I am doing both . I need to get the heads skimmed aswell as it is the 3rd time it has had new headgaskets in its life ( nearly 200k )
Not sure it has ever been skimmed.
If you know of anywhere in the midlands ?

Sorry to have hijacked you thread with my headgasket talk

Not worth just doing one, and no problem with the thread.

Should be plenty round Coventry area?

Peter

zen · Jan 23, 2014

sticking with the zavolli matrix injectors??
plenty better out there now...

listerdiesel · Jan 23, 2014

zen said:
sticking with the zavolli matrix injectors??
plenty better out there now...

It's what we have, same as the ones on my car, The LPG ECU is also Zavoli.

No reason to change, especially given the price for a set of new 2 X 4 valves.

Peter

zen · Jan 23, 2014

listerdiesel said:
It's what we have, same as the ones on my car, The LPG ECU is also Zavoli.

No reason to change, especially given the price for a set of new 2 X 4 valves.

Peter

always gave me problems..magicjet are good..not too expensive

listerdiesel · Jan 24, 2014

zen said:
always gave me problems..magicjet are good..not too expensive

We may have been lucky, ours were originally fitted in 2005, we fitted new valve sets a couple of years back and so far they have been good.

We do clean the oily residue out every once in a while.

Peter

zen · Jan 24, 2014

listerdiesel said:
We may have been lucky, ours were originally fitted in 2005, we fitted new valve sets a couple of years back and so far they have been good.

We do clean the oily residue out every once in a while.

Peter

crappy uk lpg...full of nasty ****e..thats what killed mine..it got to a point of cleaning every 2 months!!i gave up in the end..as well as they didnt pass enough gas for 400hp

listerdiesel

Well-Known Member

L90 BCM

Active Member

eightinavee

Well-Known Member

L90 BCM

Active Member

listerdiesel

Well-Known Member

listerdiesel

Well-Known Member

listerdiesel

Well-Known Member

zen

Well-Known Member

listerdiesel

Well-Known Member

zen

Well-Known Member

listerdiesel

Well-Known Member

zen

Well-Known Member

Similar threads