Hi All,

I'm a new landy owner and my 05 Freelander is experiencing this issue with the heated windscreen.

There are 2-3 small sections of filaments that work on the passenger side so I get a few lines of clearing but the drivers side does nothing at all.

I've removed the scuttle from under the windscreen by removing the wiper arms etc and taking the two pieces out and I can see the wires going to the windscreen, which are tightly adhered it seems. The fuses are both OK as well.

My question is, can you actually access the point at which the wires connect to the screen to actually see what is happening there?

I can see where they go but short of removing the windscreen I can't see how to check if the connections are corroded etc.

Been having fun with this freelander, so far there's been a new rear passenger window regulator replacement, one failed and one successful repair/replacement of the tailgate regulator, new rear wiper arm and several rear defroster tabs broken off. One wobbly wing mirror to go

Loving it!

Thanks for your help guys.

Cheers

PJ

Pjharris84 said:

My question is, can you actually access the point at which the wires connect to the screen to actually see what is happening there?

Click to expand...

Sounds like it needs a replacement screen.

Pretty common issue, as they age.
If a check of voltage shows there's power at the screen connectors, then the screen has an internal fault, and needs replacing.

Thanks for your reply, but as I said, I can't get at the connectors. How do you get to them?

Pjharris84 said:

Thanks for your reply, but as I said, I can't get at the connectors. How do you get to them?

Click to expand...

The connectors are under the scuttle panel.

i think he means the actual wire which can not be got at as they are imbedded in the glass

teddywood1 said:

i think he means the actual wire which can not be got at as they are imbedded in the glass

Click to expand...

The connections in the glass can't be measured, as they're er embedded in the glass.