RussellR

New Member
Hi everyone,
My name is Russell and at the age of 71, as a lockdown project I purchased a 2004 Td5 that needed some TLC (and a few bits as well.) There was no radio fitted from original or speakers although I did discover that the wiring was in place for the radio fit. As the centre console only had a plastic cubby slot in place I had to find a radio bezel, that was fun and I also found a new ( old stock ) Landrover radio cassette which was of the correct vintage as I have also fitted a cubby box in place of the centre seat and inside it, have placed a Phillips Land Rover 6 cd autochanger. Cut holes and fitted speakers in the dash and then ran into a major problem and I would appreciate some feedback from all you LR experts since someone somewhere has had the same experience before. The problem is that I cannot find a support cage that actually fits the radio !!. The radio appears to be a couple of mm wider side to side that any of the cages which I have tried. Can someone advise me please. I would be most grateful
 
Last edited:
Welcome, we like pictures of TD5s. Wish the radio were at the top of my in tray lol.
 
Welcome to the forum
I7pha4t.jpg


This section is for introductions only. For technical help you should post your questions in the vehicle specific sections listed below, where owners of those vehicles will offer advice.

Main forum index:
www.landyzone.co.uk/forum

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8
 
Yep, thanks Hippo I realised that after I got the first response. My apologies. I guess Next time I will get it right.
 

Similar threads