S

Silver Streak

New Member
Hi to all,

I want to up grade up disco with heated front seats. Has anyone done this to their disco.
Checked all the wiring / looms and they are in place. I understand that you can purchase the heated seat switches & cover plate for centre console from Land Rover dealer.

My question can you purchase the heated seat elements (Qty 04) and fit them into the existing seats?

Must keep the wife happy......:scratching_chin:

Cheers Silver Streak
 
sorry to jump in, does all the d1's es range have the wiring ready for the heaters and switches to fit in thanks
 
Hi to all, Thanks for all your replies especially andymach for the link. Just purchased all items required from Land Rover dealer; 4 x heating elements, 2 x switches, and cover plate to do job. Cost £110 inc delivery. Will be undertaking this job on Friday. Will let you all know how I got on. Cheers Silver Streak, & the wife's hotty botty. :flame2:
 
benj said:
sorry to jump in, does all the d1's es range have the wiring ready for the heaters and switches to fit in thanks
Click to expand...

Heated front seats are standard on my ES and any ES fitted with electric leather seats I would think. I understand that some of the earler ES's did not have electric seats, so perhaps not on that model.
 
i get you, mines got electric moving seats but not heated, would pulling the window switches cover off reveal the plugs for the switches or is there an esier way to see if the wirings already there, thanks
 
benj said:
i get you, mines got electric moving seats but not heated, would pulling the window switches cover off reveal the plugs for the switches or is there an esier way to see if the wirings already there, thanks
Click to expand...

Benj, The centre console plate where the electric windows switches are is where the heated seats switches go. First remove cover plate with a couple flat screwdrivers. Once done you'll see the 2 holes for the switches... You'll see the mounting panel is held in place by star screws. Remove all star screws and left panel forward with care. Remember electric windows plugs are still connected behind panel. Inside this area you will find 2 plugs hanging & not connected. These should be 5 Pin clip-in plugs. If present these will be your heated seat plugs to under both both seats. If you require more info then just get in touch. Regards Silver Streak.
 
benj said:
i get you, mines got electric moving seats but not heated, would pulling the window switches cover off reveal the plugs for the switches or is there an esier way to see if the wirings already there, thanks
Click to expand...


That part was an option on a Disco 2 but standard on D1 es.
 
Andy,

Thanks for your gen. I've been off-line for a while. Just to let everyone know. Seats now fitted with heating elements. Job done in about 3hrs. Not bad to do. Used tie-raps as described. Nice n toastie. Wife's happy too. Regards SS.
 
Silver Streak said:
Hi to all, Thanks for all your replies especially andymach for the link. Just purchased all items required from Land Rover dealer; 4 x heating elements, 2 x switches, and cover plate to do job. Cost £110 inc delivery. Will be undertaking this job on Friday. Will let you all know how I got on. Cheers Silver Streak, & the wife's hotty botty. :flame2:
Click to expand...

I know this is an old thread but just called my main stealer and just for the 2 base pads and the 2 back pads with no switches (I have already got them ) they wanted £156.28:eek: which does seem a hell of and increase in 2 years.
anyone know a cheaper supplier than marshall land rover in Peterborough?
 
You must log in or register to reply here.

Similar threads

htr
Freelander 1 Heated seats
Replies
3
Views
723
htr
htr
K
What money should I be asking?
2
Replies
27
Views
3K
Karls
K
malcolm_durant
Freelander 1 How generic are the cabin wiring looms?
Replies
10
Views
1K
damian46
damian46
tony_mac
Land Rover USB ports
Replies
1
Views
2K
Nodge68
Nodge68
J
Heated Seats on a GS spec
Replies
3
Views
526
James Pond
J