E

Evan farmer

Active Member

• May 14, 2018

• #1

My td5 has a make do pipe going to the egr cooler around top of engine which obstructs access and engine cover has to be off if i was to put a 2p at each end of egr cooler could i just disconnect pipe

 

E

Evan farmer

Active Member

• May 15, 2018

• #2

Bump

 

bankz5152

Well-Known Member

• May 15, 2018

• #3

You on about the coolant pipes? I used a bolt and jubilee clips

As for the cooler itself mines off totally.

Can post pics if needed

 

E

Evan farmer

Active Member

• May 15, 2018

• #4

bankz5152 said:

You on about the coolant pipes? I used a bolt and jubilee clips

As for the cooler itself mines off totally.

Can post pics if needed

Click to expand...

Yes please pics would be helpful

 

bankz5152

Well-Known Member

• May 15, 2018

• #5

I thought i coul get some though all mines buries behind pipe work etc...

The cooler can be blanked off at each end and left insitu if you like or you can remove the cooler totally and bung the coolant pipes.

 

E

Evan farmer

Active Member

• May 15, 2018

• #6

bankz5152 said:

I thought i coul get some though all mines buries behind pipe work etc...

The cooler can be blanked off at each end and left insitu if you like or you can remove the cooler totally and bung the coolant pipes.

Click to expand...

I want to blank it as it will still pass mot with it removed but the pipe on the cooler is a different style and obstructs acces

 

O

ozzyboydeano

Well-Known Member

• May 18, 2018

• #7

Evan farmer said:

My td5 has a make do pipe going to the egr cooler around top of engine which obstructs access and engine cover has to be off if i was to put a 2p at each end of egr cooler could i just disconnect pipe

Click to expand...

yes these cooling lines can be plugged up ...thats providing your EGR isnt active