mad85

Active Member

• Mar 31, 2023

• #1

need to change the crankshaft pulley and wondering if i should also replace the seal. currently it is not leaking but no idea what can happen after i have been working on the pulley. question is, any tips on levering the old seal out and pushing the new one in without spending around 400 quid in official lr tools

 

frostythor

Well-Known Member

• Apr 1, 2023

• #2

Watch this it not rocket science

 

Landmark2

Well-Known Member

• Apr 1, 2023

• #3

The video is for the V8 not TD5. Here's UP's link.
http://www.discovery2.co.uk/CrankPulley.html
HTH,
Griff

 

jamesDiscoTD5

Active Member

• Apr 1, 2023

• #4

I've done the job twice on different D2s and I've replaced it anyway rather than risk disturbing it and having to take the pulley off again to replace it.
I pry it out carefully with a screwdriver, and use the old seal and a hammer to tap the new one in.

 

mad85

Active Member

• Apr 2, 2023

• #5

jamesDiscoTD5 said:

I've done the job twice on different D2s and I've replaced it anyway rather than risk disturbing it and having to take the pulley off again to replace it.
I pry it out carefully with a screwdriver, and use the old seal and a hammer to tap the new one in.

Click to expand...

thanks for the tips!!

 

mad85

Active Member

• Apr 2, 2023

• #6

Landmark2 said:

The video is for the V8 not TD5. Here's UP's link.
http://www.discovery2.co.uk/CrankPulley.html
HTH,
Griff

Click to expand...

thanks! yes was going to follow this but it was missing how to remove the old seal and fit the new one