dag019

Well-Known Member
I am struggling to find the part numbers for the master, slave and flexi pipe I need to replace the system on a '54 plate TD5 90. Paddocks seem to indicate that the master and slave are suitable for "all defenders" (if so happy days as I have spares of both on the shelf from my 110. but other suppliers list different part numbers. can nay one help out please.

I also assume that the replacement and setting up of the pedal is the same as for my earlier 110 model regarding pedal adjustment?
 
I am struggling to find the part numbers for the master, slave and flexi pipe I need to replace the system on a '54 plate TD5 90. Paddocks seem to indicate that the master and slave are suitable for "all defenders" (if so happy days as I have spares of both on the shelf from my 110. but other suppliers list different part numbers. can nay one help out please.

I also assume that the replacement and setting up of the pedal is the same as for my earlier 110 model regarding pedal adjustment?


I replaced the master and slave on my 2005 td5 and these were the numbers I got from paddocks

F0E03162-65AD-4D25-BE3B-6F209EA4D269.png
 
"How much" I replaced my 2004 TD5 clutch 90 master cylinder about 6 years ago for around £12, had no problems with it, prices have gone up a bit but £15 gets one, loads on ebay, this link is just one of many.
https://www.ebay.co.uk/itm/290969684513
One of Mike's video's,
 
Last edited:
As long as you lubricate the seals with brake fluid and a bit of grease on the piston and spring they should last as long as any expensive one's
 
"How much" I replaced my 2004 TD5 clutch 90 master cylinder about 6 years ago for around £12, had no problems with it, prices have gone up a bit but £15 gets one, loads on ebay, this link is just one of many.
https://www.ebay.co.uk/itm/290969684513
One of Mike's video's,



I’ve been down the cheap parts before and found them to be shit but you can be lucky

I would be looking at trw/Lucas. That is what I use on the 110 and have good experience and life out of them. I would not fit bottom end parts I have also been down that road and regreted it.
 
Last edited:

Similar threads