Help needed.

While removing the centre cubby box from a 110, an over zealous friend helpfully cut a single wire that was soldered to a wire on the diagnostic plug.

Last night touching the wires back together allowed it to start. This morning it refuses to start. It turns over but the fuel pump doesn't work. The fuel pump is fairly new, all fuses and relays are good.

Any ideas??

Cheers
Squint

Did you re solder the wire back on?
Sounds like that is where you fault is. Make sure it is a good connection. Also check a wiring diagram to see what else it links back to as if you accidentally earthed it you may have inadvertently taken something else out.

Cheers Chez,

It has been towed by a garage. Couldn't fathom I out so called in the experts.