Hi guys n gals
After some advice
Or more to the point a question answering
How much Play is there On the pipe feed into the slave cylinder
From master cylinder connection
I’ve removed Clutch master Cylinder “ again “
Thinking it had broke inside as previous one did
Clutch pedal stays when depressed
however checked all inside master and there’s nothing untoward what I can see cleaned it all put Back together Got a good seal with tested by blowing in and depressing plunger by hand to release air
However the pipes in to slave are really moveable plenty of play but not sure if this is how should be
I have 2004 freebie TD4
TIA