M

mbrokof

Active Member

• Aug 13, 2022

• #1

Hello All,

I thought to get a thread cutter for the nuts of the undertray. In the catalog it says for FS110257 = M10x25. Is that really what I need to cut the threads as I could only find M10x1.5 so far and from remembering it looks more like that Amazon product
KR
Matthias

 

pwood999

Well-Known Member

Full Member

• Aug 13, 2022

• #2

25 is the length of the bolts. Undertray on wife's TD4 is in my garage at moment, so will measure them later for you.

 

Nodge68

Well-Known Member

• Aug 13, 2022

• #3

Your thread tap at M10 X 1.5 is fine.
Thread is 10mm diameter, with a pitch of 1.5mm.

 

pwood999

Well-Known Member

Full Member

• Aug 13, 2022

• #4

Nodge68 said:

Your thread tap at M10 X 1.5 is fine.
Thread is 10mm diameter, with a pitch of 1.5mm.

Click to expand...

+1, just measured mine, and definitely M10x1.5

 

M

mbrokof

Active Member

• Aug 13, 2022

• #5

Thanks @Nodge68 & @pwood999 now at least I know what it's called in English:-D. Couldn't find my caliper either. Don't know why it's not just in the catalog to make it easier.

 

Last edited: Aug 13, 2022