R Robbo999 New Member Aug 4, 2007 #1 Just fitted a lower tail gate, and the sensor's advise tail gate open, but both tailgates are aligned and shut. It's a 96 P38. Can any one help please?
Just fitted a lower tail gate, and the sensor's advise tail gate open, but both tailgates are aligned and shut. It's a 96 P38. Can any one help please?
CraigP38 Active Member Aug 6, 2007 #3 Hi I had the same problem and it turned out to be the microswitch had come in 2 so I put silicone sealant on it and problem gone Hope this helps Craig
Hi I had the same problem and it turned out to be the microswitch had come in 2 so I put silicone sealant on it and problem gone Hope this helps Craig
