Hi,

Managed to get the whole of the front axle stripped this weekend and started assessing what is U/S, sadly one of the swivel housings, O/S the steering drop arm joint has worn it elliptical, so assume this is now scrap.

I have looked around for a replacement and all seem to be the same shape and size, The axle is a defender axle that has been fitted to my 1990 90. are they all inter changeable? I will be fitting new swivel balls as that are also badly pitted.

Regards
Garry
 
Hi,

Managed to get the whole of the front axle stripped this weekend and started assessing what is U/S, sadly one of the swivel housings, O/S the steering drop arm joint has worn it elliptical, so assume this is now scrap.

I have looked around for a replacement and all seem to be the same shape and size, The axle is a defender axle that has been fitted to my 1990 90. are they all inter changeable? I will be fitting new swivel balls as that are also badly pitted.

Regards
Garry

Kits available from padocks ect that go by your chassis number iirc. :)
 
If you look on the jaguar landrover site for 200tdi era housings it will give you the part number.

This may, or may not be the same as later, but, either way, youll know what to order.
 
It looks like you have a few different part numbers -

FRC2644
FRC7065
or
TIR100000


What you need is the number off the top of the axel.

This is an example, for you to locate yours by, from a 20L axel -

1745323418995.png
 
When you look on the jaguar landrover website, choose the 22L from the list on the right and you will get the part number.

It's one of the three I gave, but I can't be bothered to look it up again, so I'm not sure which of the three it is.
 

Similar threads