3

3lliot

New Member

• Jan 30, 2012

• #1

Ok wise ones!

On my way to snowdonia at the weekend I switched my main (full) beam on and found myself in darkness!!

With lights on:

Stick forward > no main beam and cuts out dipped leaving only sidelights

Stick back to flash > no main but does not cut out dipped.

Found no blown fuses.

Suggestions or diagnosis much appreciated.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Jan 30, 2012

• #2

main beam always cuts out dipped beam

 

blue beasty

Leaks an prone to bits dropping off

• Jan 30, 2012

• #3

The Mad Hat Man said:

main beam always cuts out dipped beam

Click to expand...

Not necessarily........not if I've been anywhere near the wiring :doh:

 

3

3lliot

New Member

• Jan 30, 2012

• #4

Ok so I'm just not getting a closed circuit on my full beams then.

But it's not working with the stick forward or back so an issue somewhere other than the stick? Or nit necessarily

 

123-eddy09

Active Member

• Jan 30, 2012

• #5

Chack the contactors on the stalk by removing the dash. Can you hear the relay clicking when you stick main beam on?

 

Last edited: Jan 30, 2012

bluehaze

Well-Known Member

• Jan 30, 2012

• #6

Try overiding the stalk - if it work ok then your stalk is fubared.

 

captain skellon

Active Member

• Feb 1, 2012

• #7

had same problem took the fuse out cleaned the holder clip things they had a coating of what looked like limescase put the fuse back in....sweet

 

Def110TDi

New Member

• Feb 1, 2012

• #8

mine was that my landy was old and that the original contactor switch had worn out and wasnt touching

i replaced this and it worked perfectly
http://shop.jgs4x4.co.uk/ekmps/shop...-indicator-horn-headlamp-dip-switch-933-p.jpg