G Genus Coffea Member Aug 1, 2016 #1 While pressing in the bronze bush with a 20 tonne press the bush still protrudes around 2-3mm out of the axle. Is this normal or must it be perfectly on the shoulder of the axle. The press can't put it in any further. Thanks
While pressing in the bronze bush with a 20 tonne press the bush still protrudes around 2-3mm out of the axle. Is this normal or must it be perfectly on the shoulder of the axle. The press can't put it in any further. Thanks
frog hopper Well-Known Member Aug 1, 2016 #2 Afaik its meant to be like that, at least it is on mine so I hope so.