Rorie

Active Member
Doing my swivels just now. Come into the stub axle and YouTube and my manual discuss a roller bearing and seal to be replaced.
I have the stub axle with the tab rather than the d-washer. Looking inside there isn’t a roller bearings and not sure how the seal would come out...

does this vintage of stub have a roller bearing?
Should I be swapping out the seal inside?
B7673139-CEE7-4641-8864-7C6A3B0093C5.jpeg
DF33902A-0632-4A8E-89D8-17F2DD406EAC.jpeg
 
Just tap out the brass sleeve with a long punch, remove and replace seal and carefully replace sleeve. No inner bearing on early stub axles. Mine is 89 and doesn't have any.
 

Similar threads