What engine? Auto or manual?Hi,does anyone know why I can't get a single gear when the engine is running but get all no problem when's it's switched off ,Freelander 1 06...
Thanks ,
Steve
It's manualWhat engine? Auto or manual?
The clutch is likely dragging. What engine is it?It's manual
I had it suggested it probably needs the clutch bleeding ,it's recently had the inner slave cylinder done a few months ago and clutch pedal seems normal ,it's really odd how the gears work only when the engines offIt's manual
Td4The clutch is likely dragging. What engine is it?
Sounds like the master either needs bled, is faulty or is a cheap Aftermarket.I had it suggested it probably needs the clutch bleeding ,it's recently had the inner slave cylinder done a few months ago and clutch pedal seems normal ,it's really odd how the gears work only when the engines off
Td4
Not odd at all, it's completely normal.I had it suggested it probably needs the clutch bleeding ,it's recently had the inner slave cylinder done a few months ago and clutch pedal seems normal ,it's really odd how the gears work only when the engines off
Td4
Thanks for the help ,I'll have a go at bleeding it..Sounds like the master either needs bled, is faulty or is a cheap Aftermarket.
All the above will give your fault.
Not odd at all, it's completely normal.
If the engine is off, the gears are statutory, so the clutch isn't needed to allow the gears to shift. However if the engine is running and the clutch
Not odd at all, it's completely normal.
If the engine is off, the gears are statutory, so the clutch isn't needed to allow the gears to shift. However if the engine is running and the clutch isn't disconnecting the engine from the box, the gears are still rotating, so they can't mesh together.
isn't disconnecting the engine from the box, the gears are still rotating, so they can't mesh toge
Thanks AlibroSounds like the master either needs bled, is faulty or is a cheap Aftermarket.
All the above will give your fault.