TheVengefulElephant · Jan 28, 2009

How do you get the chuffing thing off?

Removed cover, retaining nut & shakewasher, and taken off the column housing, do I just need to get a puller on the shaft?

Pikey · Jan 28, 2009

FFS do a search.

The Mad Hat Man · Jan 28, 2009

lil-landy said:
Been down to the helpful guys at Clowne 4x4 centre today! They helped me get it lined up, but boy, was it a bitch getting it off.

Wheelpuller was on, somebody else was pulling and someone else had a chisel and a hammer going behind it. Got it off though.

Gonna have to visit them more often. Helpful bunch with a load of knowledge. Heehee, there's your little bit of advertisement guys

this help ya?

ratty · Jan 28, 2009

TheVengefulElephant said:
How do you get the chuffing thing off?

Removed cover, retaining nut & shakewasher, and taken off the column housing, do I just need to get a puller on the shaft?

Put the nut back on a couple of turns to stop you needing to eat through a straw.

Get mad with it. Repeatedly pull the steering wheel while smacking it with your knees.

The Mad Hat Man · Jan 28, 2009

ratty said:
Put the nut back on a couple of turns to stop you needing to eat through a straw.

Get mad with it. Repeatedly pull the steering wheel while smacking it with your knees.

wont do any good - but yu will end up walking like a cowboy - and give us a good larf

ratty · Jan 28, 2009

The Mad Hat Man said:
wont do any good - but yu will end up walking like a cowboy - and give us a good larf

I haven't had to use a puller on a landy steering wheel yet.

I put it down to my youthfull enthusiasm.

TheVengefulElephant · Jan 28, 2009

I've doused it in a penetrant fluid (no not that kind) and I'll try again in a min lol

Mseries3 · Jan 28, 2009

Hammer.

wiltshire landyman · Jan 28, 2009

mine was like that brute force and ignorance worked wiv mine

TheVengefulElephant · Jan 28, 2009

so far it aint liked wd-40 or an ammer

ratty · Jan 28, 2009

TheVengefulElephant said:
so far it aint liked wd-40 or an ammer

I'd say use your muscles but you'd have to get some first.

Mseries3 · Jan 28, 2009

As Ratty said Losen it off but don't take the nut right off, but give it room to move. Stand on the brake pedal and pull like ****..

TheVengefulElephant · Jan 28, 2009

got the ****er, used a lump hammer rofl.

robint · Jan 28, 2009

ere nelly can you reach the pedals ok then !!!!!!

oil dripper · Jan 28, 2009

TheVengefulElephant said:
got the ****er, used a lump hammer rofl.

you,ll only cry wen the fookin spokes crack on it

Trewey · Jan 28, 2009

oil dripper said:
you,ll only cry wen the fookin spokes crack on it

I've had the same wheel on mine fer 3yrs - no problem

vivnap · Jan 28, 2009

what wheel is it ? MOMO ?

TheVengefulElephant · Jan 28, 2009

Is that the same as yours then trewy? My dad brought it for his MG Midget, but the boss was too long, so he brought a nicer wheel with a shorter boss (why he didn't get a smaller boss is beyond me) so I'm gonna mek him an offer for this one after I've sorted out my tyres.

Trewey · Jan 28, 2009

vivnap said:
what wheel is it ? MOMO ?

Mountney.

Dez · Jan 29, 2009

Hi
Bought the same steering wheel today. has your boss cot the cancelling lugs on the back for the indicators??

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

I'm not special I'm limited edition

Well-Known Member

I'm not special I'm limited edition

Well-Known Member

Well-Known Member

I’m back

Well-Known Member

I'm not special I'm limited edition

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Cockernee, Pasty munchin bastid.

Banned

Well-Known Member

Cockernee, Pasty munchin bastid.

New Member

Similar threads