Hi there fitted the front bumper spots to my 52plate td4, got the switch to go in the dash space above the fuse box and thought all the wiring would be behind the dash as they were when fitted the cruise control. but there's nothing there looked on the forum and found a post about the stc53068 loom so does any one have one or now where to get one as have looked to no avail cheers

hi

funny enough ive just fitted the complete wiring loom for the front fogs and driving lamps on my hippo

i managed to find a left hand drive loom and just extended some wires to make it rhd

i fitted brackets to my bumper instead of pods

ref to the switches are u referring to the one that has a space for 4 x switches

i bought my complete loom on ebay, its all plug in but time consuming, the front bumper has to come off in order u can thread the wires through and cable tie them neatly as u go along

have to connect a positive and earth and also plugs into the back of ur fuse box

if u keep an eye out on ebay should hopefully see one

hope that helps abit

this kit is for the double pod installation and if u scroll down has the different part number

Freelander double pod fog/driving lamps | eBay

this is the loom i bought