bluedog333
Well-Known Member
I got these when I did mine last year, ‘87 110.
https://www.shop4autoparts.net/parts/brakes/stc1280st-c-piston-repair-kit-stainless/
https://www.shop4autoparts.net/parts/brakes/stc1280st-c-piston-repair-kit-stainless/
bluedog333
Well-Known Member
Measure your pistons to make sure they’re 46mm, I think they should be. Try and find some spare metal retaining seal thingies, or do your best to keep your originals undamaged, chances are you’ll need them.
Yes they are 46mm. Binned the old seals.Will just have to be careful. The one you have linked to should do the job. Have to say they look very cheap.
bluedog333
Well-Known Member
Cheap, but good quality. They fitted perfectly and were nice and weighty. If you need to do the brakes in one session I really recommend trying to find the metal retainers (spares) - it’s almost guaranteed one will get damaged!
