Ttuck3r · Mar 2, 2013

This is the second time i've had her out and i've noticed when driving normally she is perfect but under heavy acceleration she splutters, i have accelerated through the splutter on gears 3rd an 4th it then goes away for the duration of the journey and returns at next start up.

i was wondering if it was maybe my waste gate solenoid?

Thanks in advance..

johnlad · Mar 3, 2013

check the red plug on the ecu for oil contamination, if its there you need a new injector harness and clean red plug with brake cleaner

Ttuck3r · Mar 11, 2013

Received my new injector loom/harness, stripped it down and ATV glued every single hole, cavity i could find shut..

Ttuck3r · Apr 7, 2013

Fitted new injector loom and gasket, cleaned out the oil on the ecu side, waxoyled the engine bay and every plug got cleaned an dielectric grease blasted through. i will report back on results..

Ttuck3r · May 2, 2013

Still got the splutter, MAF sensor next im thinking.

ratty · May 3, 2013

Check the wastegate linkage isn't sticking and that the MAP sensor is clean.

Thor1950 · May 3, 2013

ratty said:
Check the wastegate linkage isn't sticking and that the MAP sensor is clean.

Is that what happens to you when your waste gate sticks............ Spattering all over the

place

ratty · May 3, 2013

Thor1950 said:
Is that what happens to you when your waste gate sticks............ Spattering all over the place

Nope. That's what happens if yer wastegate gets too slack

Forgottenpoppy · May 3, 2013

ratty said:
Nope. That's what happens if yer wastegate gets too slack

Never good if you have a slack waste gate

ratty · May 4, 2013

Forgottenpoppy said:
Never good if you have a slack waste gate

It's something I try and avoid

Ttuck3r · May 5, 2013

Well we still have a splutter and ive cleaned out the MAP sensor on the manifold, next items to check are the MAF sensor and wastegate im thinking.

How much pressure does it take to move the wastegate, i had a set of mole grips on it and been cautious i could not move the thing at all but it could also have been due to me not knowing how much pressure to give it?

Buckhandle · May 5, 2013

Did you pull or push the wastegate? You need to push it - towards the turbo

Ttuck3r · May 5, 2013

Pushed towards the turbo but not knowing how much pressure to apply so i left it.

ratty · May 5, 2013

Ttuck3r said:
Pushed towards the turbo but not knowing how much pressure to apply so i left it.

It can take a fair bit of pushing if it's sticking.Probably enough that you need two hands to move it.

Ttuck3r · May 5, 2013

Right so a good Ol welly, i was worried for bending something. Lol

Shifty1962 · May 6, 2013

Just dont twist it or it can tear the diaphragm in the actuator.

Cvk · May 9, 2013

Hi Ttuck3r, has your TD5's problem been cured yet? If so, what was the fault?

Ttuck3r · May 10, 2013

Cvk said:
Hi Ttuck3r, has your TD5's problem been cured yet? If so, what was the fault?

Not yet my new MAF sensor just arrived today so i will be posting result when i fit it this weekend. Watch this space!

freelance · May 10, 2013

when did you last fit a fuel filter to it, and do you use supermarket fuel?

Ttuck3r · May 10, 2013

freelance said:
when did you last fit a fuel filter to it, and do you use supermarket fuel?

My fuel filter was replaced about 2 weeks ago and i use BP fuel..

Active Member

Well-Known Member

Active Member

Active Member

Active Member

I'm not special I'm limited edition

Well-Known Member

I'm not special I'm limited edition

Well-Known Member

I'm not special I'm limited edition

Active Member

Active Member

Active Member

I'm not special I'm limited edition

Active Member

Well-Known Member

New Member

Active Member

Well-Known Member

Active Member

Similar threads