Flat 6

Member

• Dec 23, 2016

• #1

Spot the new member in 'fix it' mode...

So, speedo cable had pulled out of the back of the speedo - an easy fix I thought! No so, it now works but reads about 20mph fast - even from slow speeds. So it pretty much immediately jumps to 25-30 mph when starting off and then stays well ahead of the actual speed.

The landie is has 172 miles on the clock - it has just been round the clock - so now would be a reasonable time to change it but they are v.expensive new so I would prefer to fix this or perhaps fit a used one.

Before I buy one, has anyone come across this problem. Presumably it's a simple matter of gearing inside?

Or...maybe it's just really fast....

Al.

 

H

honolulujoe

Well-Known Member

• Dec 23, 2016

• #2

cable connection is probably worn, think there might be a fix for it but I can't remember what it is, might show up in a search of old threads

 

tomhop

Active Member

• Dec 23, 2016

• #3

Perhaps try a new speedo cable? I am no expert but it's a fairly inexpensive part so could be worth a try.

 

Flat 6

Member

• Dec 24, 2016

• #4

Thanks Chaps. The cable is supposed to be new. It seems to spin freely (I've driven with the end of the cable sticking out of the side of the instrument bezel). It also seated well into the back of the speedo. I'm thinking internal issue..

Al.

 

J

John S

Well-Known Member

• Dec 25, 2016

• #5

X1 it's a worn cable not expensive or difficult to replace. The short one is very expensive but in this case not relevant .

 

Blackburn

Well-Known Member

• Dec 25, 2016

• #6

This any help?

 

Attachments

• speedo.pdf

  1.1 MB · Views: 891

Flat 6

Member

• Dec 25, 2016

• #7

Thanks Blackburn. Will probably pull it to pieces at some point!

Hope you all had a great Xmas.

Al.

 

dominicbeesley

Well-Known Member

• Jan 3, 2017

• #8

I've never had a worn/broken cable make it read over though it's worth a try.

If not these lads do refurbs/rebuilds (and cables) at reasonable prices http://www.speedycables.com/