C

compo44

Member
Hello all sorry if this has been asked before I do struggle searching on here
Would anyone know which side of the speed sensor is 12v in as my two wires don’t match wiring diagram
It’s 1996 disco 300tdi
Also looking at the sensor the square is good but the disc it’s attached to is all loose is that right or bust.
I’ve just got the disco and found no speedo so checked sensor as above and no 12v to it Where does the other wire on sensor go to as I’m looking at feeding two new wires
Thank you very much
 
Green/yellow wire should be live, black/red output but if your wires are other colours you should get 12V against ground in one of them(with ignition on off course), pin 1
1684069089250.png
 
Last edited:
Sierrafery thank you brilliant stuff
I couldn’t get 12v to ground and fuse checked good so needed your info for running new wire
Would you know where the black and red goes to from sensor and looks like mine has no ecm etc cheers
 
The black/red goes to instrument cluster C221 pin 2, should be black/red there too

1684075362593.png


1684075866400.png
 
Last edited:
Awesome stuff top man. Would that connection be the black one on top of dash or the left or right white ones
How much play would you say should be in the sensor shaft
 
Absolute hero many thanks I’ll start there you have saved me a nightmare
If don’t work after that I’ll swap sensor
 
You must log in or register to reply here.

Similar threads

J
Disco 3 (LR3) Air suspension fault
2 3
Replies
45
Views
3K
gstuart
gstuart
L
XYZ switch and no front electric windows. Help!
Replies
18
Views
759
sierrafery
sierrafery
Freddie17
Freelander 1 Cam shaft sensor
Replies
4
Views
507
Freddie17
Freddie17
I
Abs speed sensor
Replies
1
Views
380
Nodge68
Nodge68
E
Disco 2 abs kicking in at a very low speed
Replies
5
Views
924
lynall
L