Grem

Active Member

• Dec 31, 2016

• #1

As title says, I have got my steering box removed and apart as bottom dust seal was in pieces, (had done its job, box was full of oil and not leaking), and the worm shaft has worn through the case hardening in the straight ahead position, and the 'wheel' that it turns against is pretty worn all around as well, tried to look for new gears, I understand the PAS boxes are a lot more common, have looked on the usual lr suppliers, ebay, and just searching for steering box parts. From research I believe it is a Gemmer steering box, I can easily post some pictures if anyone requires more identifying.

I was just wondering if anybody knows where I can find such gears or has any NOS gears or some good condition used gears maybe

Thanks in advance to all replies

Drop arm was quite stuck, had 5ft of pipe on the puller handle and a breaker bar through the puller legs to stop the lot going round

 

Grem

Active Member

• Dec 31, 2016

• #2

Knew I missed something, I have a D1 300tdi pas box in unkown condition, I wondered if the internals would fit in my box, before I pull it apart and find out the hard way

 

Grem

Active Member

• Jan 1, 2017

• #3

Bump

Thank you for any interest that may follow

 

Brown

Well-Known Member

Full Member

• Jan 1, 2017

• #4

I don't know the answer to the question, but I do like that puller.

 

Grem

Active Member

• Jan 1, 2017

• #5

Thank you, shes a heffa

 

Huddy84

Well-Known Member

• Jan 2, 2017

• #6

http://www.aztech-engineering.co.uk/steering.html

Maybe give these a shout?

 

Grem

Active Member

• Jan 2, 2017

• #7

They look perfect, I'll give them a bell, if they wont sell me the internals its not a bad price for the whole box.

Thank you very much Huddy

 

boguing

Well-Known Member

Full Member

• Jan 2, 2017

• #8

Can you let us know how you get on? I've got one that I'd like to fettle up, and have got round to tracking suppliers of seals etc.. yet.

 

boguing

Well-Known Member

Full Member

• Jan 2, 2017

• #9

And just twigged - Aztech is our very own @jamesmartin , who may well be along in a minute or two.

 

jamesmartin

Well-Known Member

• Jan 2, 2017

• #10

Grem said:

Knew I missed something, I have a D1 300tdi pas box in unkown condition, I wondered if the internals would fit in my box, before I pull it apart and find out the hard way

Click to expand...

no they wont the only parts that will fit are from another gemmer manual box
you could google rtc5911(aeu4021) and rtc5908