parptoot

Well-Known Member
I have removed the 3 x individual seats from my 1983 Land Rover 110. They have a chequer plate pattern and have barely been used within the 18 months I've had it.

One of the previous owners must have fitted them becuase as standard mine should have low back seats, which is what I have purchased.
The two outer seats have a locking plate, fixing the base to the back but the centre seat does not. I can only assume this is so the centre seat can be easily flipped down. It's what I've been doing when reversing etc. it's quite handy but I don't think this bracket is standard fitment.

These will fit other Land Rover vehicles with the same 3 separate seat layout. They will not fit the versions that have the 60/40 second row seats. They must be 3 separate seats.

Delivery would be expensive and difficult but I'm happy to be ready to hand them to a courier or in person, taking care to maintain the 2 metre separation.

If you have any questions then pelase do ask.

They are also on ebay
https://www.ebay.co.uk/itm/184263104945

I'm located in Brackley, South Northamptonshire.
Any questions then please ask.
Thanks.
IMAG1029.jpg
IMAG1030.jpg
IMAG1031.jpg
IMAG1032.jpg
IMAG1033.jpg
IMAG1034.jpg
IMAG1035.jpg
IMAG1036.jpg
IMAG1037.jpg
 

Attachments

  • IMAG1038.jpg
    IMAG1038.jpg
    292.6 KB · Views: 149
Last edited:
Will these fit in a Freelanderer?
Do you mean to fit the freelander or to be transported in the Freelander?

If the latter then yes, certainly. I'm sure I could get all three in my little Audi A2 with no problems.
 
I've tried too but cheapest I can find is over £100. ☹

That's a lot, more than I was expecting.
I'm open to offers, which would help but I can't knock off £100 to cover the shipping. I had a quick look at My Hermes but as soon as I enter the approximate dimentions they say it's too big a shipment.
 

Similar threads