Forby4

New Member
Hi, im going to fit a soft top to the series but the sides and rear do not have the loops and hooks attached. Does anyone have pictures of where they are fitted exactly.
 
Hi, im going to fit a soft top to the series but the sides and rear do not have the loops and hooks attached. Does anyone have pictures of where they are fitted exactly.

I have a full tilt on mine, can take some pics tomorrow if you let me know of what exactley
 
It would be amazing if you could get some pics :D
Basically i need to know where these all go along the sides and rear.

Photo0009_zpse7a472ad.jpg
[/URL][/IMG]

Photo0008_zps2152e6ca.jpg
[/URL][/IMG]

Photo0006_zps6a8f4948.jpg
[/URL][/IMG]

Photo0007_zpsc3e09016.jpg
[/URL][/IMG]
 
1st pic=cleats, they go along the body on each side so the rope can hook on them.
2nd pic=clips for the two rear straps of the soft top, one each side at the back.
3rd pick=rear tie offs, one each side at the back near the clips to tie of the rope from front to rear.
4th pic=front clips, one either side near each door.

Best thing to do is to look at a landy with a soft top fitted.

I take the rope of the soft top and replace with para cord, find I can get it tighter that way.
 
Hi Forby,

Have a look at the Exmoor trim website, they have a few vids I think 88 is one of them, which I used to try and see where the fittings go, for the actual fitting I put the tilt on the back and placed the brackets / clips where the rope / straps needed them. Agree with above, paracord is the way to go, just remember if you undo it the paracord may spring back into the canvas ( if it is the same as my 90 tilt, ) so fit a couple of washers or sumething to stop this.
 

Similar threads